Verifying The Software Version In Use - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Chapter 6 Preparing RPM Cards for Operation

Verifying the Software Version in Use

Caution If you do not save the configuration changes, you will have to repeat this procedure.
Step 12 To begin using the new configuration, reset the card from the active PXM card. For example:
Router#cc 7
(session redirected)
mgx8850a.7.PXM.a> resetcd 9
The card in slot number 9, will be reset. Please confirm action
resetcd: Do you want to proceed (Yes/No)? y
When the dspcds command display shows that the RPM card is active, the initialization is complete.
Verifying the Software Version in Use
To verify which version of software an RPM card is using, you can use the dspcd command or use IOS
commands at the router prompt for the RPM card. The following example shows how to display software
version information with the IOS show version command:
Router#show version
Cisco Internetwork Operating System Software
IOS (tm) RPM Software (RPM-JS-M), Experimental Version 12.1(20001205:224609)
[swtools-rpm21a 242]
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 09-Feb-01 01:17 by
Image text-base: 0x60008960, data-base: 0x61326000
ROM: System Bootstrap, Version 12.1(20001003:080040) [swtools-rommon400 102], DEVELOPMENT
SOFTWARE
BOOTFLASH: RPM Software (RPM-BOOT-M), Experimental Version 12.1(20001010:121621)
[swtools-rpm21.nightly 323]
Router uptime is 0 minutes
System returned to ROM by reload
System image file is "x:rpm-js-mz.122-4.T"
cisco RPM (NPE400) processor with 229376K/32768K bytes of memory.
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 4096KB L3 Cache
Last reset from s/w peripheral
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 FastEthernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
125K bytes of non-volatile configuration memory.
32768K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2
The following line in the example above is most important:
System image file is "x:rpm-js-mz.122-4.T"
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
6-8
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004