Cisco MGX 8950 Preface

About this Guide

This preface describes the objectives, audience, organization, and conventions of the
Cisco MGX 8950 Hardware Installation Guide.
Objectives
This publication provides descriptions for installing the following MGX 8950 hardware:
• Enclosures
Power sources (AC and DC)
•
• Controller cards (CPU for the node)
ATM interface cards
•
Trunk cards
•
Audience
The Cisco MGX 8950 Hardware Installation Guide provides installers, operators, network designers,
and managers with detailed instruction on installing the MGX 8950.
Organization
The major sections of this publication are as follows:
Chapter
•
Chapter 2,
•
Chapter 3,
•
• Chapter 4,
Appendix A,
•
Appendix B,
•
• Appendix C,
Appendix D,
•
Release 2.1, Part Number 78-11273-01 Rev. B0, March 2002
1,"Regulatory Compliance and Safety Information for the MGX 8950 Switch"
"Product Overview"
"Site Preparation"
"Enclosure and Card Installation"
"System Specifications"
"Cabling Summary"
"Standards Compliance"
"Earthing/Bonding Recommendations"
Cisco MGX 8950 Hardware Installation Guide
xv