A P P E N D I X G Reliability, Availability, And Serviceability - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Appendix G Reliability, Availability, and Serviceability
11
12
13
14
15
The following example shows the display output for the dsppostresults command:
MGX8850.7.PXM.a> dsppostresults
--------------------------------------------------------
--------------------------------------------------------
Test Name
---------------
BRAM Checksum
QE RAM
CBC RAM
Ethernet Reg
PCI-IDE Reg
Clock Mux
Framer 1 Access
Framer 2 Access
Framer 3 Access
Framer 4 Access
ATLAS 1 RAM
Hard Disk Access
The following example shows the display output for the dsphwalms command:
MGX8850.7.PXM.a>dsphwalms
Device
-------
DISK None
ATLAS (1)
ATLAS (0)
NILE4
CBC (0)
CBC (1)
QE1210 (1)
QE1210 (0)
Use dspdeverr <device> to see more detail.
The following example shows the display output for the dspdeverr command:
MGX8850.7.PXM.a>dspdeverr QE1210
PXM
MGX8850
CURRENT ERROR COUNT FOR DEVICE QE1210 (1)
--------------- ---------
Error Type
--------------
Rx HW Err
DTE ProcErr
RAM ERR
CURRENT ERROR COUNT FOR DEVICE QE1210
-------------- ----------- ---------- -----
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
HDsk PCI Access Y
HDsk Rd/Wr Y
CBC RAM Access Y
BRAM checksum Y
Control Path Y
Power On Self Test Results
Result
---------
PASS
PASS
PASS
NOT DONE
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Alarms
------
None
None
None
None
None
None
None
System Rev: 04.00
Node Alarm: CRITICAL
---------- ------ ----------- --------------
Total Errors
----- ------
0
0
0
2868 0 2868
95 0 95
2868 0 2868
2868 0 2868
28680 0 28680
Description
---------------
Test Not Required
Dec. 19, 1999 07:32:33 GMT
(Alarm : None)
(0) (Alarm :
------------ -------------
Diagnostics
None Pass
None Pass
None Pass
None Pass
None Pass
None)
G-3