Table 8-10 Parameters For Cnfrteopt Command - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Managing Connection Grooming

Table 8-10 Parameters for cnfrteopt Command

Parameter
portid
flag
-range
-interval
-tod
-weekday
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
8-36
Description
Root endpoint port identifier, in the format
[shelf.]slot[:subslot].port[:subport]. To display a list of the available
ports, enter the dsppnports command.
The flag parameter enables or disables automatic grooming. To enable
automatic grooming, replace the flag variable with enable. To disable
automatic grooming, replace the flag variable with disable.
When the -range option is specified, scheduled grooming occurs on only
those port connections in the specified VPI and VCI range. Enter the
range using the format: starting-vpi/vci..ending-vpi/vci. You must enter
two periods between the starting VPI/VCI and the ending VPI/VCI. The
slash character is required between the VPI and VCI in each VPI/VCI
pair. The default range is 0/0..4095/65535.
When the -interval option is specified, scheduled grooming repeats at the
specified interval during the scheduled times on the scheduled days. For
example, if the interval is set to 30, grooming for this port will be
repeated every 30 minutes during the scheduled grooming times. Enter
the interval in minutes. The interval range is 10 to 10000 minutes. The
default is 60 minutes.
When the -tod option is specified, scheduled grooming occurs during
only those times specified in the time-of-day range. Enter the range using
the format: start-time..end-time. You must enter two periods between the
start and the end times. Enter each time in the format: HH:MM. The
default range is 00:00..23:59, which allows scheduled grooming at all
times.
When the -weekday option is specified, scheduled grooming occurs on
only those days that are specified. Enter the weekday schedule using the
format: SMTWTFS. The letters are abbreviations for the days of the
week beginning with Sunday. To enable scheduled grooming on a
specific day of the week, enter the letter for that day. To disable
scheduled grooming on a specific day of the week, enter a period instead
of the letter. The default weekday schedule is SMTWTFS, which allows
scheduled grooming on all days.
Chapter 8 Managing PNNI Nodes and PNNI Routing
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004