Atm Signaling Compliance; Uni 3.0/3.1 Signaling; Uni 4.0 Signaling; Iisp Signaling - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

ATM Signaling Compliance

ATM Signaling Compliance
The following ATM Forum signaling specifications are supported:
•
•
•
•
Note ITU recommendations for B-ISDN DSS2 signaling is not currently supported.

UNI 3.0/3.1 Signaling

UNI 3.x signaling is supported.
Table D-1
Capability
Point-to-Point calls
Address Registration
Sub-addressing
B-LLI Negotiation
AAL Parameter Negotiation

UNI 4.0 Signaling

UNI 4.0 signaling is supported.

IISP Signaling

IISP 1.0 signaling is supported, including transport of SPVC IEs over an IISP trunk.
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
D-2
UNI 3.0/3.1 Signaling
IISP Signaling
PNNI Signaling
ATM Signaling Interworking
UNI 3.x Signaling
Network Equipment
Reference Mandatory/Optional
5.5 M
5.8 —
5.4.5.12, 14 —
Annex C M
Annex F M
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Appendix D Standards Compliance
Support
x
x
x
x
x