VXSM Configuration Worksheet
VXSM Configuration Worksheet
Table E-15
Note
VXSM cards operate only on Cisco MGX 8850 (PXM45) and Cisco MGX 8950 switches. If you are
configuring a Cisco MGX 8850 (PXM1E) or Cisco MGX 8830 switch, or if you do not have VXSM
cards installed in your switch, you do not need to fill out
Table E-15 General VXSM Card Configuration Parameters
Feature
Slot for this VXSM
Software Version Data
Card Redundancy Options
Card SCT
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
E-20
lists general switch parameters you will need to configure on each VXSM card.
Boot software
Runtime software
Standalone configuration Yes or no?
Redundant configuration
Card role
Card slot for other
half of redundant
card pair
APS connector
installed?
Appendix E
Hardware Survey and Software Configuration Worksheets
Table
Parameter
Information
Value to Configure
Slot number
Version number
Version number
Primary or secondary
Slot number
Yes or no?
SCT number
E-7.
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004