Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual page 28

Organization
•
•
•
•
•
•
•
•
•
•
Conventions
This publication uses the conventions listed in the following paragraphs.
Command descriptions use these conventions:
•
•
•
•
•
Examples use these conventions:
•
•
•
•
Means reader take note. Notes contain helpful suggestions or references to material not
Note
covered in the manual.
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
xxviii
Chapter 7, "Managing Service Class Templates,"
templates for AXSM, PXM1E, and FRSM12 cards.
Chapter 8, "Managing PNNI Nodes and PNNI Routing,"
optimize PNNI routing.
Chapter 9, "Switch Operating Procedures,"
switch is configured and during day-to-day operation.
Chapter 10, "Switch Maintenance Procedures,"
after the initial installation and configuration of the switch.
Chapter 11, "Viewing and Responding to Alarms,"
and how to view switch alarms.
Appendix A, "Downloading and Installing Software Upgrades,"
software.
Appendix B, "PXM Backup Boot Procedures,"
the switch when only the boot software is loaded.
Appendix C, "Supporting and Using Additional CLI Access
connect management workstations to the switch.
Appendix D, "Standards Compliance,"
Release 4 of the Cisco MGX switches and the Cisco MGX 8880 Media Gateway.
Appendix E, "Hardware Survey and Software Configuration Worksheets,"
you can use to plan for or record the configuration of Cisco MGX switches and the Cisco MGX 8880
Media Gateway.
Commands and keywords are in boldface.
Arguments for which you supply values are in italics.
Required command arguments are inside angle brackets (< >).
Optional command arguments are in square brackets ([ ]).
Alternative keywords are separated by vertical bars ( | ).
Terminal sessions and information the system displays are in
Information you enter is in
Nonprinting characters, such as passwords, are in angle brackets (< >).
Default responses to system prompts are in square brackets ([ ]).
describes how to download and use service class
describes how to manage your configuration after the
provides procedures for adding and replacing cards
describes the controls available on the switch
describes special procedures you can use to manage
describes the technical and compliance specifications for
font.
boldface screen
provides information you can use to
explains how to upgrade switch
Options,"describes alternative ways to
provides worksheets that
font.
screen
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
About This Guide