Figure 5-19: Setup Wizard's Secureeasysetup Screen; Figure 5-20: Secureeasysetup Logo; Figure 5-21: Additional Information - Hardware Button; Figure 5-22: Additional Information - Software Button - Cisco Linksys WRT54G User Manual

2.4ghz 802.11g wireless-g

Hide thumbs Also See for Linksys WRT54G:

Table of Contents

Wireless-G Broadband Router

Using the Router's SecureEasySetup Feature

Read these instructions before you press any SecureEasySetup buttons. You should locate the SecureEasySetup

buttons of your devices before using the Router's SecureEasySetup feature.

NOTE: SecureEasySetup uses WPA-Personal encryption. If your current wireless devices do not

support WPA-Personal security, then you cannot use SecureEasySetup on your network. You will

need to manually configure your network security using the encryption supported by your

existing devices.

1. Before you push any button, locate the SecureEasySetup button for each of your other SecureEasySetup

devices. If you are not sure where to find this button, click Where is my other SecureEasySetup button?

You will see a screen showing the SecureEasySetup logo. Click the Next button to continue or the Close

button to return to the Configure Wireless Settings screen.

You will see a screen with instructions on how to locate the SecureEasySetup hardware button. If your device

does not have a hardware button, it most likely will have a software button. Click the Next button for

instructions to locate the software button, or click the Close button to return to the Configure Wireless

Settings screen.

You will see a screen with instructions on how to locate the SecureEasySetup software button. Click the

Close button to return to the Configure Wireless Settings screen.

Chapter 5: Setting up the Wireless-G Broadband Router

Using the Setup Wizard

Figure 5-19: Setup Wizard's SecureEasySetup Screen

Table of Contents