Chapter 9
Switch Operating Procedures
Example 9-2
In the following example, the user enables online diagnostics for the PXM1E in slot 7. A medium online
diagnostics coverage test is scheduled to run every Wednesday at 11:30 (11:30 AM).
MGX.7.PXM.a > cnfdiag 7 disable enable medium 11:30 -W-
Example 9-3
In the following example, the user enables both online and offline diagnostics for the PXM1E in slot 8.
A medium offline diagnostics coverage test is scheduled to run every Monday and Friday at 21:30 (8:30
PM).
MGX.7.PXM.a > cnfdiag 7 enable enable medium 21:30 -M-F-
To display your online diagnostics test configuration and ensure all the parameters have been set
correctly, enter the dspdiagcnf command.
Enabling Online and Offline Diagnostics Tests on All Cards in a Switch
Enter the cnfdiagall command as follows to enable and configures online or offline diagnostics for all
card slots:
MGX_a.7.PXM.a > cnfdiagall <slot> <onEnb> <offEnb> [<offCover> <offStart> <offDow>]
Table 9-36
Table 9-36 cnfdiagall Command Parameters
Parameter
onEnb
offEnb
offCover
offStart
offDow
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Configuring offline diagnostics only
Configuring both online and offline diagnostics at the same time
describes the cnfdiagall command parameters.
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Managing PXM1E and AXSM Card Diagnostics
Description
Enable or disable online diagnostics. The default
is disable.
Enable or disable offline diagnostics. The default
is disable.
Set the offline diagnostics coverage time to light,
medium, or full.
light = 5 minutes or less
•
•
medium = 30 minutes or less
full = any number of minutes-no limit
•
Set the time for the offline diagnostics to begin
using 24 hour time. The format is: hh:mm. For
example: 03:45 or 22:30
Sets the day of the week for the offline diagnostics
to run. The format is SMTWTFS. For
example: -M-W--- is Mondays and Wednesdays
only.
9-85