Configuring The Grooming Thresholds; Table 8-12 Supported Grooming Thresholds - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Multiservice switch
Table of Contents

Advertisement

Chapter 8
Managing PNNI Nodes and PNNI Routing
Table 8-11 Parameters for optrte Command (continued)
vci
-range
The following example grooms all connections on port 30.1:
M8850_LA.7.PXM.a > optrte 30.1
The next example grooms a single connection on port 30.1:
M8850_LA.7.PXM.a > optrte 30.1 -vpi 30 -vci 119
This example grooms all connections in the range of VPI/VCI 100/100 and VPI/VCI 200/200 on port
6:1.3:13:
M8850_LA.7.PXM.a > optrte 6:1.3:13 -range 100/100..200/200

Configuring the Grooming Thresholds

Cisco MGX Release 5 software introduces more options for determining when to reroute a connection
during grooming. Prior to Release 5, the only grooming threshold was cumulative administrative weight.
In Release 5, you can define percentage reduction values and absolute threshold gains for the following
traffic metrics:
The threshold gains can be defined for all applicable ATM service types as shown in

Table 8-12 Supported Grooming Thresholds

Service Category
CBR
rtVBR
nrtVBR
UBR
ABR
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
When the -vci option is specified, the optrte command grooms only
those port connections that use the specified VCI. To display a list of
connections that includes the VPI and VCI for each connection, enter the
dspcons command.
When the -range option is specified, the optrte command grooms only
those port connections in the specified VPI and VCI range. Enter the
range using the format: starting-vpi/vci..ending-vpi/vci. You must enter
two periods between the starting VPI/VCI and the ending VPI/VCI. The
slash character is required between the VPI and VCI in each VPI/VCI
pair.
Administrative Weight (AW)
Cell transfer delay (CTD)
Cell delay variation (CDV)
Percentage Reduction
AW
Yes
Yes
Yes
Yes
Yes
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Absolute
CTD
CDV
AW
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
Yes
N/A
N/A
Yes
N/A
N/A
Yes
Managing Connection Grooming
Table
CTD
CDV
Yes
Yes
Yes
Yes
N/A
N/A
N/A
N/A
N/A
N/A
8-12.
8-39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgx 8950Mgx 8830Mgx 8880

Table of Contents