Configuring Ima Links; Table 3-6 Cnfimalnk Command Parameters - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Multiservice switch
Table of Contents

Advertisement

General PXM1E Configuration Procedures

Configuring IMA Links

Once you have added an IMA link, you can configure that link. Use the following procedure to configure
an IMA link.
Step 1
To display a list of IMA links that can be configured, enter the dspimalnks command as follows:
M8830_CH.1.PXM.a > dspimalnks
Link
Num
------------------------------------------------------------------------------
2.1
2.2
2.3
2.4
To view the current configuration of a link, enter the dspimalnk <link> command as follows:
Step 2
M8830_CH.1.PXM.a > dspimalnk 2.1
IMA Link Number
IMA Link Group Number
Link Rel Delay (msecs)
Link NE Tx State
Link NE Rx State
Link FE Tx State
Link FE Rx State
Link NE Rx Failure Status
Link FE Rx Failure Status
IMA Link Tx LID
IMA Link Rx LID
Link Rx Test Pattern
Link Test Procedure Status
Link LIF Integ UpTime
Link LIF Integ DownTime
Link LODS Integ UpTime
Link LODS Integ DownTime
Step 3
To configure a link, enter the cnfimalnk command as follows:
cnfimalnk -lnk <link> [-uplif <lifUpTime>] [-dnlif <lifDnTime>] [-uplods <lodsUpTime>] [-dnlods
<lodsDnTime>]
Table 3-6
Table 3-6
-lnk <link>
-uplif <lifUpTime>
-dnlif <lifDnTime>
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
3-36
Grp
Rel
Num
Dly
(ms)
State
2.1
0
Active
2.1
0
Active
2.1
0
Active
2.1
0
Active
describes the parameters for the cnfimagrp command.
cnfimalnk Command Parameters
Chapter 3
NE
NE
Tx
Rx
State
Active
Active
Active
Active
: 2.1
: 2.1
: 0
: Active
: Active
: Active
: Active
: No Failure
: No Failure
: 0
: 0
: 255
: Disabled
: 2500
: 10000
: 2500
: 10000
Enter the link number as it appears in the Link
Num column of the dspimalnks command.
Loss of IMA Frame (LIF) integration up time. The
LIF defect is the occurrence of persistent OIF
(Out of IMA Frame) anomalies for at least 2 IMA
frames.
Range: 0-25000 milliseconds.
LIF integration down time.
Range 0-25000 milliseconds.
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Provisioning PXM1E Communication Links
NE Rx
Tx
Rx
Fail
LID
LID
Status
No Failure
0
0
No Failure
1
1
No Failure
2
2
No Failure
3
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgx 8950Mgx 8830Mgx 8880

Table of Contents