Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual page 121

Chapter 2 Configuring General Switch Features
For service modules, the switch displays a report similar to the report displayed on the PXM cards.
The following example shows the dspcd report for a CESM8T1 card:
mgx8830b.1.PXM.a> dspcd 6
mgx8830b
MGX8830
Slot Number:
Inserted Card:
Reserved Card:
State:
Serial Number:
Prim SW Rev:
Sec SW Rev:
Cur SW Rev:
Boot FW Rev:
800-level Rev:
800-level Part#:
CLEI Code:
Reset Reason:
Card Alarm:
Failed Reason:
Miscellaneous Information:
Type <CR> to continue, Q<CR> to stop:
mgx8830b
MGX8830
Crossbar Slot Status:
Alarm Causes
------------
For SRM cards, the switch displays a report similar to the following example:
mgx8830b.1.PXM.a> dspcd 7
mgx8830a
MGX8830
Slot Number
Inserted Card:
Reserved Card:
State:
Serial Number:
Prim SW Rev:
Sec SW Rev:
Cur SW Rev:
Boot FW Rev:
800-level Rev:
800-level Part#:
CLEI Code:
Reset Reason:
Card Alarm:
Failed Reason:
Miscellaneous Information:
Type <CR> to continue, Q<CR> to stop:
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
6 Redundant Slot: NONE
Front Card
----------
CESM_8T1
UnReserved
Active
A79907
20.0(0.106)D
20.0(0.106)D
20.0(0.106)D
1.0(2.0)
000-00000-00
On Reset from PXM
NONE
None
NO ALARMS
7 Redundant Slot:
Front Card
----------
SRM_3T3
UnReserved
Active
955802
---
---
---
---
BB
000-00000-00
On Power up
NONE
None
System Rev: 03.00
Back Card
---------
RJ48_8T1
UnReserved
Active
A12475
---
---
---
---
000-00000-00
System Rev: 03.00
No Crossbar
System Rev: 03.00
14
Back Card
---------
BNC_3T3
UnReserved
Active
SBK043600TT
---
---
---
---
A0
800-03148-02
BAI9A6VAAA
Verifying the Hardware Configuration
Apr. 25, 2002 23:01:03 GMT
Node Alarm: MAJOR
Apr. 25, 2002 23:01:03 GMT
Node Alarm: MAJOR
Apr. 25, 2002 23:10:08 GMT
Node Alarm: MAJOR
2-49