Machine Data - Siemens SINUMERIK 808D ADVANCED Parameter Manual

Explanation of machine data and setting data
2.1 Data in the list
Cross reference
For a detailed description of the appropriate data, refer to the description of functions or manual/
guide specified.
Attributes
The "Attributes" field contains additional attributes of the data:
Attribute
NBUP
ODLD
NDLD
SFCO
SCAL
LINK
CTEQ
CTDE
Unit/unit system
Depending on MD10240 SCALING_SYSTEM_IS_METRIC, the physical units of the machine
data (MD) differ as follows:
MD10240 = 1
mm
mm/min
m/s
m/s
mm/rev.
If there are machine data with no physical unit assigned, a hyphen ("-") can be found in the
relevant field.
Note
The default setting for MD10240 SCALING_SYSTEM_IS_MERIC is "1".
Name
The "Name" field contains the name of the data in plain text.
Dimension
The "Dimension" field contains the number of elements of a data field.
12
Meaning
No Back UP: The data is not backed up as part of the data backup.
Only DownLoaD: The data can only be written to via an INI file, archive, or from the part
program.
No DownLoaD: The data can only be written to via the HMI user interface.
SaFety COnfiguration: Component of the "Safety Integrated" function
SCaling ALarm: Scaling data; when changed, alarm 4070 is displayed
LINK description: The data describes a link cluster, component of the "NCU Link" function
ConTainer EQual: The data must be the same for all axes in an axis container, component
of the "Axis container" function
ConTainer DEscription: The data describes an axis container, component of the "Axis con‐
tainer" function
2
3
MD10240 = 0
inch
inch/min
inch/s
2
inch/s
3
inch/rev.
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
Parameter Manual