Siemens SINUMERIK 808D ADVANCED Parameter Manual page 13

Activation
The control system has defined four activating conditions. Each machine has a corresponding
activating condition:
● PO: Power On (activate by powering on)
● RE: Reset (activate by pressing the following hardkey)
● CF: Config (activate by pressing the following softkey)
● IM: Immediate (activate immediately after your change)
Display filter
The "Display filter" field contains the identifier of the data filter setting that enables the data to
be seen. Using the filter setting, the exact data areas required at a given time can be selected
for display.
ID
EXP
General machine data
N01
N02
N03
N04
N05
N06
N07
N08
N09
N10
N11
A12
Channel machine data
C01
C02
C03
C04
C05
C06
C07
C08
C09
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
Data area
Expert mode
Configuration/scaling
Memory configuration
PLC machine data
Drive control
Status data/diagnostics
Monitoring/limiting functions
Auxiliary functions
Corrections/compensations
Technological functions
I/O configuration
Standard machine
NC language, ISO dialect
Configuration
Memory configuration
Initial states
Auxiliary functions
Velocities
Monitoring/limiting functions
Transformations
Corrections/compensations
Technological functions
Explanation of machine data and setting data
2.1 Data in the list
13