Siemens SINUMERIK 808D ADVANCED Parameter Manual page 216

Machine data
3.4 Axis-specific machine data
Description:
Defines the size of the modulo range. Default positions are accepted and displayed
within this range. Useful modulo ranges are n * 360 degrees with integer n. Other
settings are equally possible in principle. Attention should be paid to having a
useful relationship between the positions in the NC and the mechanics (ambiguity).
Velocity definitions are not affected by settings in this MD.
30340 MODULO_RANGE_START
degrees Modulo range start position
CTEQ
- -
Description:
Defines the start position for the modulo range.
Example:
Start =
Start =
Start = -180 degrees -> modulo range
30350 SIMU_AX_VDI_OUTPUT
- Axis signals output for simulation axes
CTEQ
- -
Description:
The machine data defines whether axis-specific interface signals are output to the PLC
while an axis is being simulated.
1: The axis-specific NC/PLC interface signals for a simulated axis are output to the
PLC.
available.
0: The axis-specific NC/PLC interface signals for a simulated axis are not output to
the PLC.
Not relevant for:
MD30130 $MA_CTRLOUT_TYPE (setpoint output type) = 1
30450 IS_CONCURRENT_POS_AX
- Default for reset: neutral/channel axis
CTEQ
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
For SW4.3:
If FALSE: On RESET, a neutral axis is reassigned to the NC program.
If TRUE:
assigned to the NC program becomes a neutral axis
30455 MISC_FUNCTION_MASK
- Axis functions
CTEQ
- -
Description:
Bit 0 = 0:
216
0.0
0 degree -> modulo range
180 degrees -> modulo range
FALSE
This means that the user PLC program can be tested without the drives having to be
All axis-specific NC/PLC interface signals are set to "0".
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
On RESET, a neutral axis remains in the neutral axis state and an axis
0x00
EXP, A01
DOUBLE
- -
0 <->360 degrees
180 <->540 degrees
-180 <->180 degrees
A01, A06
BOOLEAN
0 -
EXP, A01
BOOLEAN
0 -
0 -
0 -
0 -
0 -
0 -
A06, A10
DWORD
0 0x7FFF
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
R1, R2
Reset
1/1
A2, G2, Z1
PowerOn
1/1
G1
Reset
0/0
0/0
0/0
0/0
7/2
7/2
R2, S3, R1
Reset
1/1
Parameter Manual