Siemens SINUMERIK 808D ADVANCED Parameter Manual page 193

This information is used, among other things, for evaluating HMI, PLC and standard
cycles.
Meaning:
MD = 0:
MD = 1:
MD = 2:
MD = 3:
MD = 4:
(Enter additional technologies as and when required.)
27850 PROG_NET_TIMER_MODE
- Impact of the program runtime net counter
-
- -
Description:
The program run time is measured using system variables and can be read out. It
provides a means of outputting the current progress of the processing of a part
program. This MD can be used to make the following settings on a channel-specific
basis:
Bit 0 = 0
GOTOS
Bit 0 = 1
$AC_ACT_PROG_NET_TIME is deleted on a jump to the start of the program with GOTOS, the
value is saved in $AC_OLD_PROG_NET_TIMES, and the program counter
$AC_OLD_PROG_NET_TIME_COUNT is incremented.
Bit 1 = 0
words, the program run time is measured without the time for which the override was
set to 0.
Bit 1 = 1
run time is measured with the time for which the override was set to 0.
Bits 2 to 31
Reserved
27860 PROCESSTIMER_MODE
- Activation and impact of program runtime measurement
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
Milling
Turning
Grinding
21: Cylindrical grinding
22: Surface grinding
Nibbling
...
0x01
$AC_ACT_PROG_NET_TIME is not deleted on a jump to the start of the program with
$AC_ACT_PROG_NET_TIME ceases to be increased if override = 0 is set; in other
$AC_ACT_PROG_NET_TIME is increased if override = 0; in other words, the program
0x177
0x177
0x177
0x177
0x00, 0x00, 0x00,
0x00, 0x00, 0x00,
0x00, 0x00...
0x00, 0x00, 0x00,
0x00, 0x00, 0x00,
0x00, 0x00...
3.3 Channel-specific machine data
C09
DWORD
0x00 0x03
C09
DWORD
0 0x7FF
0 0x7FF
0 0x7FF
0 0x7FF
0 0x7FF
0 0x7FF
Machine data
-
Reset
1/1 M
K1
Reset
1/1 M
1/1 M
1/1 M
1/1 M
1/1 M
1/1 M
193