Explanation Of Machine Data And Setting Data - Siemens SINUMERIK 808D ADVANCED Parameter Manual

Explanation of machine data and setting data

2.1 Data in the list
The machine data and the setting data are listed in form of tables shown below:
MD number Identifier
Units Name
Attributes
System Dimension
Expanded table
The expanded table includes data from the standard table plus additional rows with system-
specific values.
MD number Identifier
Units Name
Attributes
- Dimension
<System 1> -
<System 2> -
A dash "-" in a field means that the same value as for <System 1> applies for the specified
system.
The entry "-/-" in the "Protection" field means that the machine data is not available for the
specified system.
Example:
10881 MM_EXTERN_GCODE_SYSTEM
- ISO_3 Mode: GCodeSystem
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
MD number and identifier
MD and SD are addressed via their numbers or their names (identifiers). The number and the
name, as well as the activation type and the unit are displayed on the screen of the control
system.
In the field "identifier", you can see the name of the data.
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
Default value Minimum value
Default value
Default value
-
0
0
1
1
Display filter
Data type
Maximum value
Display filter
Data type
Minimum value Maximum value
- -
- -
N01, N12
DWORD
0 2
0 2
0 2
0 2
2
Reference
Activation
Protection Class
Reference
Activation
Protection
-/-
-1/-
FBF A
Power On
0/0 S
0/0 S
1/1 M
1/1 M
11