Siemens SINUMERIK 808D ADVANCED Parameter Manual page 163

21020 WORKAREA_WITH_TOOL_RADIUS
- Consideration of tool radius for working area limitation
-
- -
Description:
This machine data indicates whether the tool radius is taken into account in the
working area limitation.
0:
1:
checked. This means that the working area is reduced by the tool radius.
21110 X_AXIS_IN_OLD_X_Z_PLANE
- Coordinate system for automatic frame definition
-
- -
Description:
1 =
the current tool orientation, the new coordinate system is additionally rotated around
the new Z axis so that the new X axis is in the old Z-X plane.
0 =
the current tool orientation, the new coordinate system is maintained as it results
from the kinematics of the machine, i.e. it is assumed that the coordinate system is
fixed to the tool and rotates with the tool (orientation).
From SW 5.3:
This machine data is only effective when the three lowest value decimal positions
(units, tens, hundreds) of SD42980 $SC_TOFRAME_MODE) equal zero. Otherwise the frame
definition is specified by SD42980 $SC_TOFRAME_MODE.
MD irrelevant for:
No orientation programming
Related to:
Further references:
/PG/, Programming Guide, Fundamentals
21160 JOG_VELO_RAPID_GEO
mm/min JOG rapid traverse for geometry axes
-
- 3
Description:
Velocity in JOG mode with rapid traverse override for geometry axes in the channel (mm/
min)
21165 JOG_VELO_GEO
mm/min Jog feedrate for geometry axes
-
- 3
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE...
It is checked whether the tool center lies within the working area limits.
The tool radius is taken into account when the working area limitation is
TRUE, TRUE, TRUE,
TRUE, TRUE, TRUE,
TRUE, TRUE...
With automatic definition of a frame (TOFRAME), the Z direction of which equals
With automatic definition of a frame (TOFRAME), the Z direction of which equals
10000., 10000.0,
10000., 10000.,
10000.0, 10000.,
10000., 10000....
1000., 1000., 1000.,
1000., 1000., 1000.,
1000., 1000., 1000., 1...
3.3 Channel-specific machine data
C03, C06
BOOLEAN
0 -
EXP, C01, C09
BOOLEAN
0 -
C07
DOUBLE
0.0 -
C07
DOUBLE
0.0 -
Machine data
A3
Reset
2/2 M
M1, K2
PowerOn
1/1 M
F2
Reset
1/1 M
F2
Reset
1/1 M
163