Siemens SINUMERIK 808D ADVANCED Parameter Manual page 26

Machine data
3.1 Display machine data
222 USER_CLASS_PLC_ACCESS
- PLC project protection level
-
- 0
Description:
PLC project protection level
223 USER_CLASS_WRITE_PWA
- Protected work area protection level
-
- 0
Description:
Protected work area protection level
247 V24_PG_PC_BAUD
- PG: baud rate (300, 600, 1200, 2400, 4800, 9600, 19200, 38400) BYTE
-
- 0
Description:
PG: baud rate (300, 600, 1200, 2400, 4800, 9600, 19200, 38400)
280 V24_PPI_ADDR_PLC
- PLC station address
-
- -
Description:
PLC station address
281 V24_PPI_ADDR_NCK
- NCK station address
-
- -
Description:
NCK station address
289 CTM_SIMULATION_TIME_NEW_POS
- Simulation of actual value update rate
-
- 0
Description:
Use this MD to define the time intervals in which the simulation graphic is updated on
the current machine tool machining.
Value = 0 means no update
290 CTM_POS_COORDINATE_SYSTEM
- Coordinate system position
-
- 0
Description:
The position of the coordinate system can be changed as follows:
291 CTM_CROSS_AX_DIAMETER_ON
- Diameter display active for transv. axes
-
- 0
26
7 0
7 0
7 5
2 0
3 0
100 0
2 0
1 0
- -
BYTE Immediately
7 2/2
- -
BYTE Immediately
7 3/2
- -
Immediately
9 3/3
- -
BYTE PowerOn
126 3/3
- -
BYTE PowerOn
126 3/3
- -
BOOLEAN Immediately
4000 4/3
- -
BYTE Immediately
7 4/3
- -
BYTE Immediately
1 4/3
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
M
M
U
U
U
U
U
U
Parameter Manual