Siemens SINUMERIK 808D ADVANCED Parameter Manual page 178

Machine data
3.3 Channel-specific machine data
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
are output at the time of trace generation.
22
23
bit 0 is set).
22910 WEIGHTING_FACTOR_FOR_SCALE
- Input resolution for scaling factor
-
- -
Description:
Definition of the unit for the scaling factor P and for the axial scaling factors I,
J, K.
Meaning:
0
1
Related to:
SD43120 $SA_DEFAULT_SCALE_FACTOR_AXIS,
SD42140 $SC_DEFAULT_SCALE_FACTOR_P
178
Recording of various statuses of the channel.
Error statuses in the NCK memory management are scanned during trace generation.
An error renames the trace file. Static data
Possible names and their meaning:
NCFIER.MPF Error in the file system
NCSLER.MPF Error during string creation
NCFIER.MPF Error on New/Delete
All block changes in the interpreter are recorded. Dynamic data.
Axial VDI signals are recorded. Dynamic data.
Only in conjunction with MD18794 $MN_MM_TRACE_VDI_SIGNAL
OEM traces are activated. Dynamic data.
Synchronized actions are recorded. Dynamic data.
NOTICE: Filled in applications with intensive use of
these trace points, other events are ignored!
That is why this bit should remain at 0 in these cases.
Reserved.
Recording of station commands.
Note: Most important output of the NCK module NCSC!
Recording of gantry commands
Recording of changes in the drive's status
Recording of the processing of the Event-Queue and generation of command sequences
Recording of event destructor call
Recording of the dynamic limitations per block (only active when bit 0 is set).
Recording of the Look Ahead data (only active when bit 0 is set).
Recording of all Functions Config data.
Both a static part as well as a block-related part with the dynamic block data
Config data output (static)
Recording if computing time is given away in the preprocessing (only active when
FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE...
Scale factor in 0.001
Scale factor in 0.00001
Dynamic data.
EXP, C01, C11
BOOLEAN
0 -
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
Static data
-
PowerOn
2/2 M
Parameter Manual