Siemens SINUMERIK 808D ADVANCED Parameter Manual page 83

Description:
The switching position of the probe is offset by the value.
The offset is only active with the simulated probes and MD 13230
$MN_MEAS_PROBE_SOURCE=0.
14510 USER_DATA_INT
- User data (INT)
-
- 32
Description:
User data is stored in the NCK-PLC interface, and can be read by the PLC user from the
DB20 during the runup.
14512 USER_DATA_HEX
- User data (HEX)
-
- 32
Description:
User data is stored in the NCK-PLC interface and can be read by the PLC user from the
DB20 during the PLC runup.
14514 USER_DATA_FLOAT
- User data (FLOAT)
-
- 8
Description:
User data is stored in the NCK-PLC interface, and can be read by the PLC user from the
DB20 during the runup.
14516 USER_DATA_PLC_ALARM
- User data (HEX)
-
- 128
Description:
Configuration of alarm responses to user PLC alarms
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
15700 LANG_SUB_NAME
- Name for substitution subroutine
-
- -
Description:
Name of the user program called on the basis of a substitution configured by MD30465
$MA_AXIS_LANG_SUB_MASK.
The user program is called with the path configured by MD15702 $MN_LANG_SUB_PATH.
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0.0, 0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0...
0, 0, 0, 0, 0, 0, 0, 0...
NC start disabled
Read-in disable
Feed disable for all axes
EMERGENCY STOP
PLC in stop
Alarm log
Definition for alarm or message (1: Alarm, 0: Message
Delete at POWER ON
-
N03
DWORD
-32768 32767
N03
DWORD
0 0x0FF
N03
DOUBLE
-3.40e38 3.40e38
N03
BYTE
0 -
N01
STRING
- -
Machine data
3.2 General machine data
P3
PowerOn
7/3
P3
PowerOn
7/3
P3
PowerOn
7/3
A2, P3
PowerOn
7/3
K1
PowerOn
2/2
83