Siemens SINUMERIK 808D ADVANCED Parameter Manual page 204

Machine data
3.3 Channel-specific machine data
n=5:
Related to:
MD28260 $MC_NUM_AC_FIFO
28264 LEN_AC_FIFO
- Length of FIFO variables $AC_FIFO1-$AC_FIFO10
-
- -
Description:
Length of the FIFO variables $AC_FIFO1 to $AC_FIFO10.
All FIFO variables are the same length.
28266 MODE_AC_FIFO
- Mode of FIFO processing
-
- -
Description:
Mode of FIFO processing:
Bit 0 = 1:
The sum of all FIFO contents is updated at each write access.
Bit 0 = 0:
No summation
Related to:
MD28260 $MC_NUM_AC_FIFO
28274 MM_NUM_AC_SYSTEM_PARAM
- Number of $AC_SYSTEM_ PARAM for motion-synchronous
actions
-
- -
Description:
Number of $AC_SYSTEM_ PARAM parameters for motion-synchronous actions.
Depending on MD28255 $MC_MM_BUFFERED_AC_PARAM, DRAM or SRAM
Reserved for SIEMENS applications.
28276 MM_NUM_AC_SYSTEM_MARKER
- Number of $AC_SYSTEM_MARKER for motion-synchronous
actions
-
- -
Description:
Number of $AC_SYSTEM_MARKER markers for motion-synchronous actions.
Depending on MD28257 $MC_MM_BUFFERED_AC_MARKER, DRAM or SRAM is required.
Reserved for SIEMENS applications.
28290 MM_SHAPED_TOOLS_ENABLE
- Enable tool radius compensation for contour tools
-
808d-me42 -
204
Current write index relative to FIFO start
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
0, 0, 0, 0, 0, 0, 0, 0...
FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE,
FALSE, FALSE...
C01
DWORD
0 32535
C01
BYTE
0 -
EXP, C02
DWORD
0 20000
EXP, C02
DWORD
0 20000
C01, C08, C02
BOOLEAN
0 -
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
2.3, 2.4, 6.1, M5
PowerOn
1/1 M
2.3, 2.4, 6.1
PowerOn
1/1 M
-
PowerOn
1/1 M
is required.
-
PowerOn
1/1 M
-
PowerOn
ReadOnly M
Parameter Manual