Siemens SINUMERIK 808D ADVANCED Parameter Manual page 200

Machine data
3.3 Channel-specific machine data
28180 MM_MAX_TRACE_DATAPOINTS
- Length of the trace data buffer
NBUP
- -
Description:
MM_MAX_TRACE_DATAPOINTS defines the size of an internal data buffer which contains the
trace recordings.
28200 MM_NUM_PROTECT_AREA_CHAN
- Number of channel-specific protection zones (SRAM)
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
This machine data defines how many channel-specific protection areas are set up.
Related to:
MD28210 $MC_MM_NUM_PROTECT_AREA_ACTIVE (number of simultaneously active protection
areas)
MD18190 $MN_MM_NUM_PROTECT_AREA_NCK (number of control-specific protection areas
(SRAM))
References:
/FB/, A3, "Axis/Contour Tunnel Monitoring, Protection Areas"
28210 MM_NUM_PROTECT_AREA_ACTIVE
- Number of simultaneously active protection zones in one channel DWORD
-
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
This machine data defines the number of protection areas that may be activated
simultaneously for each channel.
It is not practical to enter a numerical value greater than MD18190
$MN_MM_NUM_PROTECT_AREA_NCK + MD28200 $MC_MM_NUM_PROTECT_AREA_CHAN.
Related to:
MD28200 $MC_MM_NUM_PROTECT_AREA_CHAN (Number of blocks for channel-specific
protection areas)
MD18190 $MN_MM_NUM_PROTECT_AREA_NCK (Number of control-specific protection areas
(SRAM))
References:
/FB1/ Function Manual Basic Functions; Axis Monitoring, Protection Areas (A3)
200
100, 100, 100, 100, 0
100, 100, 100, 100...
10 0
10 0
10 0
10 0
0, 0, 0, 0, 0, 0, 0, 0... 0
0, 0, 0, 0, 0, 0, 0, 0... 0
10 0
10 0
10 0
10 0
0, 0, 0, 0, 0, 0, 0, 0... 0
0, 0, 0, 0, 0, 0, 0, 0... 0
EXP, C02, C06 -
DWORD PowerOn
20000 1/1
C02, C06, C09 A3
DWORD PowerOn
10 1/1
10 1/1
10 1/1
10 1/1
10 1/1
10 1/1
C11, C02, C06, A3
C09
PowerOn
10 1/1
10 1/1
10 1/1
10 1/1
10 1/1
10 1/1
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
M
M
M
M
M
M
M
M
M
M
M
M
M
Parameter Manual