Siemens SINUMERIK 808D ADVANCED Parameter Manual page 239

808d-mte40 -
808d-mte60 -
Description:
The jerk limit value limits the rate of change of axis acceleration in JOG and REF
modes as well as in positioning axis mode with MD18960 $MN_POS_DYN_MODE=0.
The setting and time calculation are made as for MD20600 $MC_MAX_PATH_JERK (path-
related maximum jerk).
Not relevant for:
●
Path interpolation
●
Error states that lead to quick stop.
Related to:
MD32420 $MA_JOG_AND_POS_JERK_ENABLE (initial setting of axial jerk limitation)
MD18960 $MN_POS_DYN_MODE
32431 MAX_AX_JERK
m/s³, rev/s³ Maximum axial jerk for path movement
-
808d-me42 5
808d-me62 5
808d-te42 5
808d-te62 5
808d-mte40 5
808d-mte60 5
Description:
Maximum axial jerk for path motion
Each field element corresponds to a G code in the 59th G code group.
32432 PATH_TRANS_JERK_LIM
m/s³, rev/s³ Maximum axial jerk at block transition in continuous-path mode
CTEQ
808d-me42 5
808d-me62 5
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
1000.0, 1000.0, 1.e-9
1000.0, 1000.0,
1000.0, 1000.0,
1000.0, 1000.0...
1000.0, 1000.0, 1.e-9
1000.0, 1000.0,
1000.0, 1000.0,
1000.0, 1000.0...
20., 20., 40., 20., 20., 1.e-9
20., 20., 40., 20., 20.,
20., 20., 40.,...
40., 40., 40., 20., 20., 1.e-9
40., 40., 40., 20., 20.,
40., 40., 40.,...
20., 20., 40., 20., 20., 1.e-9
20., 20., 40., 20., 20.,
20., 20., 40.,...
40., 40., 40., 20., 20., 1.e-9
40., 40., 40., 20., 20.,
40., 40., 40.,...
1.e6, 1.e6, 1.e6, 1.e6, 1.e-9
1.e6, 1.e6, 1.e6, 1.e6,
1.e6, 1.e6, 1.e6...
1.e6, 1.e6, 1.e6, 1.e6, 1.e-9
1.e6, 1.e6, 1.e6, 1.e6,
1.e6, 1.e6, 1.e6...
20., 20., 40., 20., 20., 0.0
20., 20., 40., 20., 20.,
20., 20., 40.,...
40., 40., 40., 20., 20., 0.0
40., 40., 40., 20., 20.,
40., 40., 40.,...
3.4 Axis-specific machine data
- 2/2
- 2/2
A04 B1, B2
DOUBLE NEW CONF
- 3/3
- 3/3
- 3/3
- 3/3
- 3/3
- 3/3
A04 B1, B2
DOUBLE NEW CONF
- 3/3
- 3/3
Machine data
239