Siemens SINUMERIK 808D ADVANCED Parameter Manual page 231

32082 HANDWH_MAX_INCR_VELO_SIZE
mm/min, rev/min Limitation for velocity override
CTEQ
808d-me42 -
808d-me62 -
808d-te42 -
808d-te62 -
808d-mte40 -
808d-mte60 -
Description:
For the velocity override of positioning axes:
>0:
signal> 0 or SD41010 $SN_JOG_VAR_INCR_SIZE for the associated machine axis
0:
32084 HANDWH_STOP_COND
- Handwheel travel behavior
CTEQ
- -
Description:
Definition of the response of the handwheel travel to axis-specific VDI interface
signals or the CP-SW limit stop or a stop from an OEM application:
Bit = 0:
Interruption or collection of the distances preset via the handwheel.
Bit = 1:
Cancelation of the traversing motion or no collection.
Bit assignment:
Bit 0:
Bit 1:
Bit 2:
application
Bit 3:
Bit 4:
Bit 5:
For machine axis:
Bit 6 = 0
For handwheel travel, the maximum velocity at which the relevant machine axis can be
traversed is the feedrate set in MD32020 $MA_JOG_VELO.
Bit 6 = 1
For handwheel travel, the maximum velocity at which the relevant machine axis can be
traversed is the feedrate set in MD32000 $MA_MAX_AX_VELO.
Bit 7 = 0
The override is active in handwheel travel.
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1
500., 500., 500., 1800.
500., 500., 500., 1800.,
1800.
500., 500., 500., 1800.
500., 500., 500., 1800.,
1800., 1800.
(500.0/1.0),
(500.0/1.0),
(500.0/1.0),
(500.0/1.0),
(500.0/1.0),...
(500.0/1.0),
(500.0/1.0),
(500.0/1.0),
(500.0/1.0),
(500.0/1.0),...
Limitation of size of selected increment $MN_JOG_INCR_SIZEL<Increment/VDI
No limitation
0x10FF
feedrate override
spindle speed override
feedrate stop/spindle stop or CP-SW limit stop or stop from an OEM
clamping procedure running (= 0 no effect)
servo enable
pulse enable
A05, A10, A04
DOUBLE
(0./ 0.) (1.e300/ 1.e300)
(0./ 0.) (1.e300/ 1.e300)
(0./ 0.) (1.e300/ 1.e300)
(0./ 0.) (1.e300/ 1.e300)
(0./ 0.) (1.e300/ 1.e300)
(0./ 0.) (1.e300/ 1.e300)
EXP, A10
DWORD
0 0x17FF
Machine data
3.4 Axis-specific machine data
-
Reset
1/1
1/1
1/1
1/1
1/1
1/1
H1
Reset
1/1
231