Definition Of R Parameters As Cycle Machine Data, Cycle Setting Data - Siemens SINUMERIK 810M Operating And Programming Manual

7 Interfacing to the Machine

7.3.2 Definition of R parameters as cycle machine data, cycle setting data

7.3.2 Definition of R parameters as cycle machine data, cycle setting
data
To protect parameters (R110 to R199) used for measuring cycles against unauthorized
modification, parameters can be defined as:
• Cycle machine data (CMD) or
• Cycle setting data (CSD)
They are defined with general NC MD 14 to 17.
R parameters
110 to 199 per channel
Cycle MD
Cycle SD
Cycle MD
Definitions of area limits with general NC MD 14 to 17
7-6
MD 14 = Cycle MD from
R parameter number ...
MD 16 = Cycle SD from
R parameter number ...
MD 17 = Cycle SD to
R parameter number ...
MD 15 = Cycle MD to
R parameter number ...
Where overlaps occur, SDs are dominant.
Any allocation possible.
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810M, GA3 (BN)
09.91
6ZB5 410-0EQ02