Displaying Lacp Settings And Status For The Remote Side; Table 10: Lacp Remote Device Configuration Information - Edge-Core ECS4110-28T Management Manual

| Interface Configuration
C 5
HAPTER
Trunk Configuration
D LACP
ISPLAYING
S S
ETTINGS AND TATUS
R S
FOR THE EMOTE IDE
Figure 57: Displaying LACP Port Internal Information
Use the Interface > Trunk > Dynamic (Configure Aggregation Port - Show
Information - Neighbors) page to display the configuration settings and
operational state for the remote side of a link aggregation.
CLI R
EFERENCES
"show lacp" on page 1030
◆
P
ARAMETERS
These parameters are displayed:

Table 10: LACP Remote Device Configuration Information

Parameter Description
Partner Admin LAG partner's system ID assigned by the user.
System ID
Partner Oper System LAG partner's system ID assigned by the LACP protocol.
ID
Partner Admin Current administrative value of the port number for the protocol
Port Number Partner.
Partner Oper Operational port number assigned to this aggregation port by the
Port Number port's protocol partner.
Port Admin Priority Current administrative value of the port priority for the protocol
partner.
Port Oper Priority Priority value assigned to this aggregation port by the partner.
Admin Key Current administrative value of the Key for the protocol partner.
Oper Key Current operational value of the Key for the protocol partner.
Admin State Administrative values of the partner's state parameters. (See
preceding table.)
Oper State Operational values of the partner's state parameters. (See preceding
table.)
– 188 –