Edge-Core ECS4110-28T Management Manual page 184

| Interface Configuration
C 5
HAPTER
Trunk Configuration
To configure LACP parameters for group members:
Click Interface, Trunk, Dynamic.
1.
Select Configure Aggregation Port from the Step list.
2.
Select Configure from the Action list.
3.
Click Actor or Partner.
4.
Configure the required settings.
5.
Click Apply.
6.
Figure 52: Configuring LACP Parameters on a Port
To show the active members of a dynamic trunk:
Click Interface, Trunk, Dynamic.
1.
Select Configure Trunk from the Step list.
2.
Select Show Member from the Action list.
3.
Select a Trunk.
4.
Figure 53: Showing Members of a Dynamic Trunk
– 184 –