Network Adapters Are Not Getting Listed In Aoip; Ip Fails To Copy Files With Sr G3 Controller For Os Installation With All Source Media; Not Able To Create Or Delete Logical Drive Using Software Raid Controller; Troubleshooting Windows-Specific Issues - Hitachi HA800 G3 Series Manual

Network Adapters are not getting listed in AOIP

Symptom
Any network adapter connected to the system will not be visible via AOIP.
Cause
The Redfish API used by AOIP is no longer available.
Action
Use the F10 IP to list and configure the network card. The fix will be available in a future version of IP.

IP fails to copy files with SR G3 controller for OS installation with all source media.

Symptom
User cannot proceed with installation of OS via Rapid Setup option
Cause
The Redfish API used by Rapid Setup is no longer available.
Action
OS installation can be performed via Deployment Settings by creating a job and launching it. The fix will be available in a
future version of IP.

Not able to create or delete logical drive using Software Raid Controller

Symptom
Cannot create or delete logical drives using Software Raid Controller.
Action
1. Set the UEFI POST Discovery Mode to Force Full Discovery in the BIOS using the following procedure:
• Boot the BIOS
• From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) >
System Options > Boot Time Optimizations > UEFI POST Discovery Mode
• Change to Force Full Discovery
2. Save and reboot.
3. Enter Intelligent Provisioning by pressing F10 during POST.

Troubleshooting Windows-specific issues

Windows Essentials does not install from USB source

Symptom
Windows Essentials does not install from a USB source.
Cause
USB installations are not supported for Windows Essentials.
Action
Install Windows Essentials from an ISO source.
Troubleshooting 47