Middle Roll Assembly - Xerox DOCUPRINT N17 Service Manual

4.9.2 Middle Roll Assembly

Removal
1 Remove the Top Cover Assembly ( REP 4.2.6 Top Cover Assembly ).
2 Turn the Top Cover Assembly over.
3 Pull the locking tab on the gear to unlatch the Gear from the Middle Roll Assembly.
4 Pull the Gear away from the Middle Roll Assembly.
5 Unhook both bearings and pull the Middle Roll Assembly together with the bearings away from
the Exit Assembly Frame.
NOTE: The Middle Pinch Rolls might fall off when you remove the Middle Roll Assembly.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.9.2.1 Middle Roll Assembly Removal
SAS449F.CDR
6/98
www.printcopy.info
4-44
sas449fa
Xerox DocuPrint N17 Service Manual