Exit Tray Assembly - Xerox DOCUPRINT N17 Service Manual

9.3.2 Exit Tray Assembly

Removal
1 Remove the OCT Unit ( REP 9.3.1 OCT Unit) .
2 Press the right side portion of the OCT Cover outward to disengage the projection in the right
side of the Exit Tray Assembly from the OCT Cover.
3 Press the left side portion of the OCT Cover outward to disengage the projection in the left side of
the Exit Tray Assembly from the OCT Cover.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 9.3.2.1 Removing the Exit Tray Assembly
6/98
www.printcopy.info
9-9
SAS4A3F
Offset Catch Tray (OCT) Option