Tray Latch Spring - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

8.3.13 Tray Latch Spring

NOTE: The removal procedure for the Tray Latch Spring is the same for Feeders 2 and 3.

1 Remove the 500 Paper Size PWB Assembly ( REP 8.3.11 500 Paper Size PWB Assembly ).

2 Remove the one screw which secures the Tray Latch Spring from the inside of the Feeder.

3 Move the Tray Latch Spring towards the front to remove it from the Feeder.

Perform the removal steps in reverse order.

500-Sheet Paper Feeder Option

Figure 8.3.13.1 Removing the Tray Latch Spring

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents