P/J Table - Xerox DOCUPRINT N17 Service Manual

9.6.2 P/J Table

Coordinate
PJ
202 D4
E9
209 D3
E9
210 D2
E8
223 D2
E7
224 D3
E8
225 D2
E8
226 F3
F9
227 F3
G9
228 I4
I12
*1: indicates the corresponding Parts list and item number in Section 3.
*2: @ at the beginning of the harness name indicates that the harness is a part of the component.
Xerox DocuPrint N17 Service Manual
Mounting
*1
Mounted on PL
Holder 15-5
OCT PWB 15-4
OCT PWB 15-4
OCT PWB 15-4
OCT PWB 15-4
Stack Full Sensor 15-3
Home Sensor 15-43 Connector Harness
Exit Sensor 15-36 Connector Harness
Bottom part of Gear 15-15 P: Connector
Housing
www.printcopy.info
Harness
*2 *1
Name PL
OCT Harness 15-6
Assembly
OCT Harness 15-6
Assembly
@Drive Motor 15-8
Assembly
@Offset Motor 15-40
Assembly
Connector Harness 15-7
Assembly
Connector Harness 15-7
Assembly
15-7
Assembly
15-7
Assembly
15-7
Harness Assembly
6/98
9-29
Description
Connects the OCT PWB
and the Print Engine
Controller.
Connects the OCT PWB
and the Print Engine
Controller.
Connects the OCT PWB
and the Drive Motor
Assembly.
Connects the OCT PWB
and the Offset Motor
Assembly.
Connects the OCT PWB
and J225 (Stack Full
Sensor)], J226 (OCT
Home Sensor), J227 (Exit
Sensor), and P/J228
(Direct Solenoid).
Connects the OCT PWB
and the Stack Full Sensor.
Connects the OCT PWB
and the Home Sensor.
Connects the OCT PWB
and the Exit Sensor.
Connects the OCT PWB
and the Direction
Solenoid.
Offset Catch Tray (OCT) Option