Front Cover Assembly - Xerox DOCUPRINT N17 Service Manual

4.2.4 Front Cover Assembly

Removal
1 Open the Front Cover Assembly.
2 Remove the Harness Cover ( REP 4.2.3 Harness Cover ).
3 Disconnect P/J 130.
4 Slide the Cover Stopper to the left to free it from the Frame. (See Figure 4.2.4.1.)
5 Remove the KL clip securing the cover to the printer.
6 Slide the Front Cover Assembly to the right, and remove the assembly.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.2.4.1 Removing the Front Cover
6/98
www.printcopy.info
4-10
sas404f
Xerox DocuPrint N17 Service Manual