Error Code "0102 - Xerox DOCUPRINT N17 Service Manual

7.3.17.6 Error Code "0102"

You were directed to this RAP because the Control Panel displayed the error code "0102" during the
Power On Diagnostics.
1 Switch OFF the printer power.
2 Remove the System Controller. If there is a RAM SIMM in location 3, remove it.
3 Move the RAM SIMM in location 2 into location 3.
4 Reinstall the System Controller and switch on the printer power.
5 The Control Panel displays code 0103.
Y: Replace the RAM SIMM currently in location 3.
N: Go to step 6.
6 Switch OFF the printer power
7 Remove the System Controller and move the RAM SIMM back to location 2.
8 Reinstall the System Controller and switch on the printer power.
9 The Control Panel displays code 0102.
Y: Replace the System Controller.
N: Go to Final Actions.
Xerox DocuPrint N17 Service Manual
6/98
www.printcopy.info
7-39 Repair Analysis Procedures (RAPs)