Serial Menu - Xerox DOCUPRINT N17 Service Manual

5.1.4.9 Serial Menu

The Serial Menu sets options for the serial port connection. To select the Serial Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until "Serial Menu" is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Serial submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Job Menu
Password Menu
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
Ethernet Menu
Token Ring Menu
Novell Menu
Print Menu
Reset Menu
1
2
3
4
5
General Procedures/Information
Figure 5.1.4.9.1 Serial Menu
1
2
2
3
4
5
Appears only when the hard drive is installed.
Appear only when the option is installed.
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
This was formally called the Test Menu
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
www.printcopy.info
On*
Port Enable
Off
5 - 300 (30*)
Port Timeout
Serial PDL
Auto*
PCL
PostScript
On
Binary PS
Off*
Baud Rate
XON/XOFF
Flow Control
Robust XON/XOFF
Hardware*
3/99
5-16 Xerox DocuPrint N17 Service Manual
57600 4800
38400 2400
28800 1200
19200 600
9600*