Registration (Lead Edge To Trail Edge) - Xerox DOCUPRINT N17 Service Manual

Registration (Lead Edge to Trail Edge)

Measure the registration on two consecutive System Controller Test Patterns. Fold the lead edge
to the top line of the ladder chart. Observe the fold at the zero reference line, Figure 7.5.3.6.
The fold is within +/- 2.0 mm from the zero reference line.
Y: The test prints meet the Lead Edge to Trail Edge registration specification. Go to the
Registration (Side-to-side) checkout.
N: Go to RAP 7.5.15 Misregistered Image.
Repair Analysis Procedures (RAPs)
Figure 7.5.3.6 Registration (Lead Edge to Trail Edge)
Zero Reference Line
www.printcopy.info
7/99
7-84 Xerox DocuPrint N17 Service Manual
1000a.tif