Main Motor Operation - Xerox DOCUPRINT N17 Service Manual

5.2.1.12 Main Motor Operation

This diagnostic tests the Main Drive Motor.
WARNING! This test switches on the Main Motor. Be careful around the Motor and Drive
Assembly.
Execute Main Motor Operation:
1 Enter Diagnostics Mode 1. The LCD displays PRINT COUNTER OPERATION indicating the
printer is in Diagnostics Mode 1.
2 Press the MENU UP (1) or MENU DOWN (5) key until the LCD displays the MAIN MOTOR
OPERATION message .
3 Press the ENTER key to start the test. The LCD displays the MAIN MOTOR message.
MAIN MOTOR
Operation EXECED
4 Verify that when you press the ENTER key, the Motor and Drive Assembly turn for approximately
25 seconds.
5 If you wish to exit this test and enter another test, press the MENU UP (1) or MENU DOWN (5)
key to scroll to EXIT DIAGNOSTICS MENU. Then press the ENTER key. Refer to 5.2.1.27 Exit
Diagnostics Operation .
6 To exit this test and return to normal operation, switch OFF the printer power then switch it ON.
Xerox DocuPrint N17 Service Manual
3/99
www.printcopy.info
5-41 General Procedures/Information