Duplex Harness Assembly - Xerox DOCUPRINT N17 Service Manual

10.3.9 Duplex Harness Assembly

Removal
1 Remove the Duplex PWB Assembly ( REP 10.3.7 Duplex PWB Assembly ).
2 Press the two claws which retain the Duplex Harness Assembly towards each other to disengage
and detach the Duplex Harness Assembly from the Connector Chute.
3 Remove the Duplex Harness Assembly from the Duplex Module along the wiring path.
Duplex Harness
Assembly
Replacement
Perform the removal steps in reverse order.
Duplex Module Option
Figure 10.3.9.1 Removing the Duplex Harness Assembly
www.printcopy.info
6/98
10-16 Xerox DocuPrint N17 Service Manual
SAS490F