Elevator Up Switch - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

12.6.5 Elevator Up Switch

1. Disconnect the AC power.

2. Open the feeder drawer and remove the Left Access Cover (12.2.4).

3. Check the mechanical operation of the switch. The switch is

deactuated when paper is in the feed position and actuated when the

elevator tray is lowered. The mechanical operation is correct.

Go to step 4.

N: Repair or replace as necessary.

4. Measure the resistance of the switch. The resistance is 0 (zero) ohms

with the switch deactuated and infinite with the switch actuated.

Go to step 5.

N: Replace the Elevator Up Switch (12.2.4).

5. Check the wiring between the Elevator Up Switch and P/J3 pins 1 & 2

on the Controller PWB. The wiring is OK.

Go to step 6.

N: Repair or replace the wiring as necessary.

6. The Elevator Up Switch appears to be operating correctly. Return to the

RAP that sent you here.

High Capacity Feeder Option

www.printcopy.info

Denotes Pin #1

Xerox DocuPrint N17 Service Manual

Table of Contents