Fusing - Xerox DOCUPRINT N17 Service Manual

Fusing

NOTE: The operating environment of the paper is from 5 Celsius at 15% relative humidity to 35 Celsius
at 85% relative humidity. The fusing performance of the printer will vary according to the
environment.
• A cold environment will affect the warm-up time.
• The weight (lb. / gsm) of the paper or transparency will affect the fusing of prints.
• High humidity will have an adverse affect on the fusing of prints.
Check the fusing quality of the image of a System Controller Test Pattern (Figure 7.5.3.4). Rub
the image three times with a soft cloth or tissue. The image should not lift off of the surface of the
print.
The fusing quality of the image meets the specification.
Y: The printed test patterns meet the Fusing specification. Go to the Resolution checkout on
the next page.
N: Go to RAP 7.5.14 Unfused Image Procedure.
Rub these areas
with a soft cloth
or tissue.
Repair Analysis Procedures (RAPs)
Figure 7.5.3.4 Fusing Quality
LEAD EDGE
6
7
3
We conduct many of
ever, these mail s
coverage. Would yo
your time to read
survey has been de
time and effort. T
test pattern; a qu
envelope are enclou
3 2 1
1
2
3
7/99
www.printcopy.info
7-82
3 2 1
1
Test Print
N17-941110-2-S
8.5x11 (SEF)
1
SCAN
We conduct many of
ever, these mail s
coverage. Would yo
your time to read
5
survey has been de
time and effort. T
2
test pattern; a qu
envelope are enclou
6
5
3
7
1
6
Xerox DocuPrint N17 Service Manual
1
2
3
2
SAS1002