Main Power Switch - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:

Table of Contents

4.12.7 Main Power Switch

1 Remove the System Controller Chassis ( REP 4.12.1 System Controller Chassis ).

2 Unplug the Harness Connector from the Main Power Switch. (See Figure 4.12.7.1.)

3 Squeeze on the switch retaining clamps while pushing the switch out from the printer.

Perform the removal steps in reverse order.

Repair/Adjustment Procedures

Figure 4.12.7.1 Main Power Switch Removal

www.printcopy.info

Xerox DocuPrint N17 Service Manual

Table of Contents