Parallel Menu - Xerox DOCUPRINT N17 Service Manual

Hide thumbs Also See for DOCUPRINT N17:
Table of Contents

Advertisement

5.1.4.8 Parallel Menu

The Parallel Menu sets options for the parallel port connection. To select the Parallel Menu:
1 Press the MENU UP (1) or MENU DOWN (5) key until "Parallel Menu" is displayed.
2 Press the ITEM UP (2) or ITEM DOWN (6) key to move through the Parallel submenu.
3 Press the VALUE PLUS (3) or VALUE MINUS (7) key to select options from the submenu.
4 When the desired submenu option is displayed, press ENTER.
Xerox DocuPrint N17 Service Manual
Figure 5.1.4.8.1 Parallel Menu
Job Menu
1
Password Menu
Tray Menu
PCL Menu
System Menu
Parallel Menu
Serial Menu
2
Ethernet Menu
2
Token Ring Menu
3
Novell Menu
4
Print Menu
5
Reset Menu
1
Appears only when the hard drive is installed.
2
Appear only when the option is installed.
3
Appears only when Novell is enabled from the
Ethernet and Token Ring menus.
4
This was formally called the Test Menu
5
Appears only when ONLINE and ENTER are
pressed simultaneously at Power On.
www.printcopy.info
On*
Port Enable
Off
5 - 300 (30*)
Port Timeout
Parallel PDL
Auto*
PCL
PostScript
Binary PS
On
Off*
On*
Bi-directional
Off
3/99
5-15
General Procedures/Information

Advertisement

Table of Contents
loading

Table of Contents