7.5.21 Resolution
LEAD EDGE
6
1
Test Print
N17-941110-2-S
8.5x11 (SEF)
1
SCAN
7
5
2
3
We conduct many of
ever, these mail s
coverage. Would yo
your time to read
5
survey has been de
time and effort. T
test pattern; a qu
envelope are enclou
3 2
1
1
1
2
3
Initial Action:
•
Ensure the resolution is set to 600 DPI in the System Menu (5.1.4.7 System Menu).
•
Ensure that the print density is set to the default value (3). Execute Diagnostic Mode 3, Print
Density.
Procedure:
1 Replace the EP Cartridge. The problem is resolved.
Y: Return to Final Actions.
N: Replace the following in sequence to resolve the problem:
- Laser Assembly
- High Voltage Power Supply (HVPS)
NOTE: After problem is resolved, reinstall the old EP Cartridge.
Xerox DocuPrint N17 Service Manual
Definition
3 2
1
At 600 DPI, two pixel lines and halftone patches cannot be reproduced
1
2
3
clearly on the print. See Figure 7.5.2.2 System Controller Test Print
We conduct many of
ever, these mail s
coverage. Would yo
your time to read
Pattern Legend .
survey has been de
time and effort. T
test pattern; a qu
envelope are enclou
2
6
3
7
6
SAS1002
www.printcopy.info
6/98
7-107
Repair Analysis Procedures (RAPs)