System Controller Test Print - Xerox DOCUPRINT N17 Service Manual

5.2.5 System Controller Test Print

NOTE: The System Controller must be installed to produce System Controller test prints.
1 Press the ONLINE key to enter the Offline Mode.
2 Press MENU UP (1) or MENU DOWN (5) key to scroll through menu options until MENUS/TEST
MENU is displayed.
3 Scroll with the ITEM UP (2) or ITEM DOWN (6) key until TEST MENU/TEST PRINT is displayed.
4 Press ENTER. Processing... TEST is displayed and the System Controller Test Print is
produced.
General Procedures/Information
3/99
www.printcopy.info
5-70 Xerox DocuPrint N17 Service Manual