Paper Transportation Iii; Bias Transfer Roll (Btr) Assembly - Xerox DOCUPRINT N17 Service Manual

4.7 Paper Transportation III

4.7.1 Bias Transfer Roll (BTR) Assembly

Removal
1 Open the Front Cover Assembly.
2 Remove the EP Cartridge.
WARNING! To prevent contamination of the BTR, do not touch the foam portion of the roll. Handle
the roll by the shaft extension on each end.
3 Use a slotted screwdriver to lift each end of the BTR Assembly upward, and remove the
Assembly.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.7.1.1 BTR Assembly Removal
SAS435F.CDR
SAS435F
www.printcopy.info
6/98
4-40 Xerox DocuPrint N17 Service Manual