Xerox DOCUPRINT N17 Service Manual page 441

9.7.8 OCT Drive Motor Assembly Failure
1 Check the Power Supply to the OCT Drive Motor Assembly. There is +24VDC between the
following pins:
• P210-1 and P209-8
• P210-2 and P209-8
• P210-3 and P209-8
• P210-4 and P209-8
• P210-5 and P209-8
• P210-6 and P209-8
Y: Go to step 2.
N: Replace the OCT PWB.
2 Check the resistance of the windings of the OCT Drive Motor Assembly. There is approximately
115 ohms resistance between the following pins:
• J210-1 and J210-3
• J210-1 and J210-5
• J210-2 and J210-4
• J210-2 and J210-6
Y: Replace the OCT PWB.
N: Replace the OCT Drive Motor Assembly (Exit).
Xerox DocuPrint N17 Service Manual
6/98
www.printcopy.info
9-39 Offset Catch Tray (OCT) Option