Right Cover - Xerox DOCUPRINT N17 Service Manual

4.2.7 Right Cover

Removal
1 Open the Front Cover Assembly.
2 Remove the Stopper securing the Front Cover Assembly to the Frame.
3 Open the Rear Cover Assembly.
4 Remove the screw securing the Stopper of the Rear Cover to the Frame, and remove the
Stopper.
5 Remove the Top Cover Assembly ( REP 4.2.6 Top Cover Assembly ).
6 Remove the two screws securing the Right Cover to the Frame.
7 Unlatch the hooks securing the Right Cover at the top and bottom and remove the Right Cover.
8 Using a flat blade screwdriver, unlatch the two hooks securing the top of the Right Cover.
9 Unlatch the two bottom hooks and the rear hook. Pull the Right Cover out while biasing it down.
Replacement
Perform the removal steps in reverse order.
Xerox DocuPrint N17 Service Manual
Figure 4.2.7.1 Right Cover Removal
SAS407F.CDR
6/98
www.printcopy.info
4-13
sas407f
Repair/Adjustment Procedures