Print Engine Controller - Xerox DOCUPRINT N17 Service Manual

4.12.3 Print Engine Controller

Removal
1 Remove the System Controller Chassis ( REP 4.12.1 System Controller Chassis ).
2 Disconnect P13, P14, P15, P18, P19, P21, P22, P23, P24, P25, P28, and P32 from the Print
Engine Controller.
3 Remove the three screws securing the Print Engine Controller to the Frame. (See Figure
4.12.3.1.)
4 Pinch the head of the PWB standoff to release the LVPS from the Frame, and remove the Print
Engine Controller.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.12.3.1 Print Engine Controller Removal
6/98
www.printcopy.info
4-58
sas466fa
Xerox DocuPrint N17 Service Manual