4.9.6 Option Cover/Eliminator Assembly
Removal
1 Remove the Option Cover. (Press the two hooks of the Option Cover Plate from under the rear
part of the Top Cover Assembly.)
2 Remove the three screws.
3 Remove the Eliminator Assembly along with the Exit Earth Spring.
Replacement
Perform the removal steps in reverse order.
Repair/Adjustment Procedures
Figure 4.9.6.1 Option Cover/Eliminator Assembly Removal
SAS454F.CDR
www.printcopy.info
6/98
4-48
Xerox DocuPrint N17 Service Manual
sas453f